Non permanent Ground Protection – A Product Guide

Your floors need particular protection when undergoing reworking, throughout new development, moving heavy furniture or equipment, and for different occasions past day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost 1000’s of dollars in replacement and repair costs. This article describes surface protection products for flooring so to make knowledgeable choices on the very best product to use to your needs.

Types of Protection Packaging:

Ground protection products are commonly packaged as either:

(1) Products by the roll: These include frequent adhesive films, rolled paper products and rolled textile protection. Protective supplies purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to 48 mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and other inflexible protection. Protective supplies bought by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and normally come as four toes by 8 feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but doesn’t work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can often leave adhesive residue when removed. Widespread paper protection products embrace:

· Ramboard™ A coated compressed paper board 38 mils thick that’s breathable, waterproof and made from recycled paper.

· Kraft paper is a lightweight brown paper that is cheap however doesn’t afford any impact protection and may easily tear

· Scrim paper might incorporate coatings or reinforcements to make them water resistant as well as scrim threads to strengthen the paper and stop tearing. These improved papers are longer lasting than common Kraft paper or rosin paper however they’re additionally too thin to supply much impact protection.

· Rosin paper is thicker than Kraft paper and may be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The large drawback of utilizing Rosin paper is that it could cause a permanent stain if the paper gets wet. Rosin paper also can rip easily so it not normally recommended to be used

· Corrugated cardboard rolls or sheets may also be used to protect flooring. Corrugate provides impact protection nevertheless it isn’t coated with a water resistant end and needs to be saved dry at all times so that it doesn’t disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.zero as much as 3.5 mils in thickness. They trap any moisture from escaping so that they shouldn’t be used on any floors that are curing. Two of the good benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not supply any impact protection and are normally rated for short time period use of 30 to ninety days only. Polyethylene films are designed for one-time use and don’t use recycled supplies making them a poor selection in maintainable protection. Protection films are available in a variety of adhesion “tack”. Hard surface protection films could have a decrease tack and coloration than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with a number of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Each plywood and Masonite are sold in the standard dimension of 4 ft by eight ft and are more expensive per square foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/four inch thick. Plywood is commonly 1/4 inch to three/4 inch thick. Each products provide impact protection on a wide range of floor types and provide adequate protection against heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nonetheless they’re cumbersome to carry and store. These wood sheets needs to be used on high of a softer protection similar to a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they stop wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don’t offer moisture protection and could be harder to cut to dimension than different protection types.

Non permanent Ground Protection – A Product Guide
Tagged on: